How ToWindows

Windows 10 Update Error (0x80080005) Fix


Are you looking for a genuine way to know how to Fix Windows Update Error Code 0x80080005? Well, if yes then by the end of this article you will absolutely solve this issue.

Any issue in windows 10 occurs on updating the OS and you can’t sip updating it as it is a mandatory process that automatically takes place. The updates happen to ensure the safety and security of the users and user-friendliness too but sometimes these updates create a lot more chaos than comfort and the error code 0x80080005 is one of them.

Since you can’t deny the updates so you have to face this type of issues most of the times. By the way, there is nothing to worry about as here are some effective solutions that will fix the issue for you.

Fix Windows 10 Update Error 0x80080005


#1 Try Disabling Any Antivirus

It is the first thing that one should try in case the error code 0x80080005. If you have any third party antivirus or malware detector, then disable it temporarily and then check for the error. Mostly, the error does not appear when you uninstall or disable the antivirus.

It works because sometimes the antivirus affects the files of windows operating system during updating it and hence the issue gets created. Antivirus often prevents files from updating or it can even delete the files that are necessary for executions of tasks. Hence it will be a wise step to uninstall or disable the antivirus. Do not get worried if it doesn’t make any changes to the error then you can enable it again.


#2 Run SFC Scan

SFC scan is well-known for detecting the corrupted files and replace them with the good ones. This way, it can be a vital tool to scan with and it comes very easy too. Here are the steps for SFC scan:

  • open the command prompt, press windows key and X and choose the program
  • There, type this command: sfc/scannow. After that hit the Enter key let the command work.
  • In a few minutes, the process gets done and you can check the error if it still bugs you.

#3 Use Dism

Just like SFC, DISM can be a great tool too in your situation. DISM is an inbuilt tool too that fixes the broken files and get everything in manner. Also, in case you don’t have an internet connection you can use the installation disk and let it does the rest. Have a look at these steps and follow along:

  • Get the command prompt on the screen

dism-windows-10-checkhealth

  • Here paste the following line in the command prompt:

DISM /Online /Cleanup-Image /RestoreHealth

  • You can also use this line as an alternative:

DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess

  • Here X means your drive in which your windows files are installed such as C drive.

Have some patience as it may take some time but the results will be beneficial for sure.


#4 Run Windows Troubleshooter

To follow up with this solution users will be needed to use the Windows Troubleshooter and to know the process clearly, let’s have a look at these instructions below:

  • First, access the Microsoft’s official website and look for the Windows Update Troubleshooter
  • Once you downloaded it, make sure to install it as an administrator
  • Just go with the wizard following the on-screen instruction and get it done
  • Now, restart your PC and you can see the final results on startup of your device.

#5 Try Your Hands On Windows Update Components

Here we will go to use Command Prompt in order to reset some service, so just go with the flow:

  • First, Open the command prompt by pressing windows key and X and choose it.
  • In the black space, paste these commands one by one and hit the enter key
    net stop bits
    net stop wuauserv
    net stop appidsvc
    net stop cryptsvc
  • Next, you need to delete qmgr*.dat files, so open the cmd again and paste this command:
    Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat” and press Enter
  • Now, paste this one into that command prompt:
    cd /d %windir%\system32 and hit Enter
  • This time, paste all these command one by one and do not forget to press enter key after each command:

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll


#6. To reset Winsock:

  • Now, you need to reset the winsock, so put this command: netsh winsock reset in Command Prompt.

netsh winsock reset

  • In the next step, you will reset the BITS service and the Windows Update service by pasting these commands:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

Give a restart to your PC and the error should be gone by now.


#7 Rename Softwaredistribution Folder

Here we will again use the command prompt to make some changes to the SoftwareDistribution Folder using these steps:

Rename Softwaredistribution Folder

  • Open the command prompt following the steps mentioned above
  • Now, get ready to paste these commands into that and hit enter after each command:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

  • Now, these commands are to rename the folder:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

  • At last, paste these commands and hit enter each time:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Now, it is time to restart your PC to check if this thing worked or not.


#8 Enable Some Settings Using Gpedit.Msc

  • Very first, get the run box on the screen by pressing windows key and R
  • Now, type this: gpedit.msc and hit enter
  • It will open up a new window and you need to follow this path:
    Computer Configuration > Policies > Administrative Templates: Policy > System
  • Once you are there on System, look at the right panel and find ‘Specify settings for optional component installation and component repair.’

Specify settings for optional component installation and component repair

  • Double click it and it will open up a new window where make sure the Enabled is checked and ‘Contact Windows Update directly’ is ticked too.

  • At last, click OK and exit all the windows.

#9 Use Command Prompt to grant control

  • Open up the command prompt
  • Paste this command:
    cmd.exe /c takeown /f “C:\System Volume Information\*” /R /D Y && icacls “C:\System Volume Information\*” /grant:R SYSTEM:F /T /C /L
  • It will finish up in a few seconds, wait till then

Once it is done, you can exit all the windows and restart the PC.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close